Page 87 - 2025 Premier Digital Fence Catalog

High-Tensile Tools
& Connectors
HT Wire Staples
Heavy-duty Class III galvanized.
Approximately 48 per lb.
Barbed 1.6" —for stapling HT
and barbed wires.
Barbed 2"—has a throat wide
enough for SupaTube (see p. 79).
Barbed, 1.6", 1 lb...................#360200 $3.50
Barbed, 1.6", bucket, 44 lb. ..#360210 $135.00
Barbed, 2", 1 lb......................#360000 $3.50
Barbed, 2", bucket, 44 lb......#360010 $135.00
1.6"
2"
NEW!
Hi-Tensile Wire
#301200 and #301201
See our website
premier1supplies.com
Wire Twister
Use this instead of pliers to twist HT
wire. Twisting HT wire with pliers is a
serious mistake because the pliers’ teeth
damage the protective zinc coating—
which causes premature rusting. Also
better for your hands than pliers (less
chance of skinning your fingers). 5-1/4"L
Wire Twister, 0.10 lb. ...................................#408300 $1.80
Speed Brace is for an
8 ft brace.
Gripple
Cable
Compression Spring
For shorter runs of HT wire and around
feedlots and corrals. Not needed for HT
wire runs longer than 300 ft because the
wire itself provides adequate elasticity.
Hot-dip galvanized. 12" long.
Compression Spring, 1.30 lb. ...................#344000 $8.50
Gripple™ Tensioning Tool
Tool uses a Gripple (p. 88) to tension 10
gauge, 12 gauge and barbed wire without
need of an In-Line strainer or handle.
Takes a little time to learn the technique.
Once learned, it’s a nifty system. Gripple
fence products are very popular because
of their speed and ease of use. However,
they’re not the least-cost system out there.
Gripple Tensioning Tool, 1.90 lb.............. #336830 $75.00
Gripple™ Speed Brace Cable
Brace wire system that’s quick to install,
simple, sure and effective. Includes: 16 ft
cable and one Gripple.
Speed Brace , 1.05 lb................................#336840 $8.25
Brace
Pin
Brace Pins
For securing strain
posts to cross braces.
Galv. steel 3/8" dia.
10", 0.28 lb...#339100 $1.10
5", 0.20 lb. .....#339200 $0.87
Round Strainer
Framed Strainer
Round Handle
Framed Handle
HT Wire Strainers & Handles
Framed Strainer and its handle are interchangeable with
similar Strainrite and Hayes In-Line styles of the past.
With the Round In-Line Strainer, unlike the Framed unit,
the wire does not have to be cut.
Framed In-Line Strainer, 0.40 lb.............................................................. #332002 Framed Strainer Handle, 0.75 lb. .............................................................#408002 Round In-Line Strainer, 0.46 lb. ............................................................... #330100 Round Strainer Handle, 2 lb. ....................................................................#408200 $3.50
$5.00
$3.50
$8.50
CA residents see p. 106 for Prop 65 Warning.
• Uncoils HT wire
effectively and easily
• Galvanized for
extended life
• Reduces labor
High-Tensile Wire Dispenser
Designed by Premier to unroll HT wire.
The 4 brackets slide in and out to handle coils of multiple
diameters. Suitable for unattended use because a built-in
adjustable brake prevents overwinding.
HT Wire Dispenser, 24 lb. ........................................................................... #402000 $148.00
HI-TENSILE TOOLS
87