Page 83 - 2025 Premier Equipment Digital Catalog

REDUCE FEED WASTE WITH WELDED WIRE INSERTS
Build Your Own Feeder Plan Booklet
Instructions on how to build double-sided and single-sided hay feeders using Premier’s feeder panels.
Instructional Brochure (printed)
With purchase of panels .................... FREE Without purchase of panels, 0.10 lb
#900000........................................$3.00
DOWNLOAD THE BOOKLET FREE ON OUR WEBSITE
Eyebolt & Connecting Pin
We use these for attaching gates and panels for both feeder designs. (See photo below left.)
Eyebolt, 0.50 lb.............................................................#936100 $2.10 Pin (3 ft x 0.5" dia), 2.10 lb...........................................#151200 $8.00
Double-Sided Design
Animals work for each mouthful of hay and kernel of grain, reducing waste and keeping them busy. Tight spacings prevent heads getting caught in the panels. We use treated wood for the legs because they contact the ground. Can be built with either 24" x 48" or 30" x 48" panels.
Feeders can serve double duty by subdividing pens
3" x 5" holes 30" wide 48" long 1/4" dia hot-dip galv rods
30" x 48"
Panel Insert
Eyebolt
Connecting Pin
CA residents see p. 130 for Prop 65 Warning.
30" x 48" Panel Insert
For goats and sheep. Holes are 3" x 5" to match noses of goats and small to medium sheep breeds. Our preferred panel for our flocks (Dorper/Romanov/Katahdin).
Panels are 30" tall. Therefore no plywood is needed at the top. (See how plywood sides are used in the photo at far left.)
Comes with a bag of six barbed 1.6" staples.
30" x 48" Panel Insert, 12.12 lb........................................................#9661001 $42.00 BUILD YOUR OWN FEEDERS
83