Page 72 - 2025 Premier Digital Fence Catalog

SmoothCote™ FiberRod Posts
Pros and Cons
• Good line posts for fences with
minimal side, up or down pressure.
Will disappoint if exposed to heavy
or continuous strain.
• Self-insulating. But they need a
clip to hold the twine, tape, rope
or wire. Wire clips are inclined to
entangle with each other. Plastic
clips are a better choice.
• Our Fiberglass posts have excellent
UV coating (no splinters). Less
likely to break than plastic posts.
• Neither as heavy nor as bulky
as steel or wood posts. Easy to
carry without snagging.
• Harder to install than FiberTuff,
PigTail or PowerPosts.
4 post options:
1. 3/8"—For temporary multistrand
or added support for electrified
netting fences.
1/2"—They are so much stronger
and stiffer than 3/8" dia rods
that we use them for longer term
fences or those on hilly terrain
(they handle strain better).
3. 11/16"—For use as corner/curve/
end support posts for taller nets
(PermaNet, Deer QuikFence).
They’re not intended as line posts
so clips are not available.
Popular for use as bank poles
for catfishing.
4. 11/16" Pre-Drilled—Same
post as the 11/16" above, but has
approximately 25 pre-drilled
holes in 2" increments starting
20" from the bottom. Use these
holes to thread through 2.25mm
or 3mm twine and MaxiShock.
1. 3/8"
9mm
2. 1/2"
13mm
3. 11/16"
17mm
4. 11/16"
Pre-Drilled
17mm
• Lightweight for excellent portability
• Pencil-pointed for easy insertion
• An extra UV resistant urethane outer
coating to prevent fiberglass splinter
A
B
2. FiberRods
Unlike early fiberglass rods (or some
current farm store), our FiberRods have a
thick outer coating to resist sunlight and
splintering. Can handle without gloves.
FiberRods 3/8" (priced individually, but sold in pkgs of 20)
Clip options: A, B or C (at right)
3' FiberRod, 3/8", 0.28 lb. .............................#321831 4' FiberRod, 3/8", 0.38 lb. .............................#321841 5' FiberRod, 3/8", 0.47 lb..............................#321851 6' FiberRod, 3/8", 0.56 lb. .............................#321861 7' FiberRod, 3/8", 0.66 lb. .............................#321871 $1.40
$1.75
$2.25
$2.69
$3.20
FiberRods 1/2" (sold individually)
Clip option: B (at right)
4' FiberRod, 1/2", 0.69 lb..............................#321941 5' FiberRod, 1/2", 0.86 lb..............................#321951 6' FiberRod, 1/2", 1.03 lb.............................. #321961 $2.80
$3.40
$4.00
FiberRods 11/16" (sold individually)
6' FiberRod, 11/16", 2.05 lb..........................#321981 New! FiberRods 11/16", pre-drilled (sold individually)
6' FiberRod, pre-drilled, 1.8 lb.....................#321982 $6.95
$8.10
B
C
The 3/8" and 1/2" FiberRods are pencil-pointed.
Install with a wooden or rubber mallet (p. 51)
or with a hammer and drive cap (sold below).
Drive
Cap
3/8" FiberRod Driver
This scaled down
post driver fits over 3/8"
FiberRods to help you
drive fiberglass posts
into your fenceline.
Galv. construction. For
posts up to 10mm in dia.
Driver, 1.86 lb.....#321880 $6.80
Drive Caps used to install FiberRods
Two very useful purposes:
1. Protects hands during installation.
2. Protects the post top when the soil is so hard you
have to tap the top of the post with a hammer.
The drive cap takes the hammer’s force,
reducing wear to the post.
Drive cap for 3/8" post, 0.05 lb. ............................................ #321810 Drive cap for 1/2" & 11/16" posts, 0.05 lb.......................... #321942 $0.61
$0.69
One cap can
be used for
multiple posts.
premier1supplies.com • 1-800-282-6631
POSTS premier1supplies.com • 1-800-282-6631
72