Page 68 - 2025 Premier Digital Fence Catalog

FiberTuff ™ Posts The post for netting!
TOP
PICKS
48"
Ends, corners and major
directional changes
PVC posts with 6 internal fiberglass
cables for extra stability.
•
Use the footplate to step post into
the soil at the point of a curve,
corner or end. At corners and
curves, lean the post outward to
curve the post toward the pull of
the netting—this helps straighten
the fence.
•
•
Cap can be tapped with a mallet.
Insert the top strand of netting into
the top slot (see inset below).
The larger 22mm post is twice as stiff
as the 19mm, though only available in
42" and 48" posts.
Spike is the same in both 19mm
and 22mm posts. Step-in footplate is
welded to the spike for support.
• Preferred support post for electrified netting
• Available in 2 diameters and 7 heights
• Steel ground spike step-in footplate
• Easy to install/remove
These are strong! Use at rises, dips and
major directional changes. Easier to use
than posts found in farmstores.
42"
35"
30"
FiberTuff naming system
Example: 22/42/SS
22 = diameter of post in millimeter
42 = height of post in inches
SS = single spike
24"
20"
18"
Installed Height
Note: Insert
FiberTuff posts at
the inside corner
of net to best
support the mesh
against strain.
FiberTuff 19 (19mm/0.75" dia.)
19/18/SS, 18", 0.75 lb..................................#208050 $3.20
19/20/SS, 20", 0.80 lb. ................................. #208051 19/24/SS, 24", 1 lb. .......................................#208056 19/30/SS, 30", 1.20 lb. ................................. #208052 $3.60
$3.80
$4.00
19/35/SS, 35", 1.40 lb..................................#208053 $4.25
FiberTuff 22 (22mm/0.87" dia.)
22/42/SS, 42", 1.70 lb..................................#208054 $4.90
22/48/SS, 48", 2 lb....................................... #208055 $5.20
7"
FiberTuff 19
FiberTuff 22
68 Replacement Caps
Cap (for FiberTuff 19 post),
0.01 lb. ...................... #206506 $0.35
Cap (for FiberTuff 22 post),
0.01 lb. ...................... #206507 $0.39
POSTS Double Clip
Single Clip
Note: Clips can only be used with 19mm FiberTuff.
FiberTuff Clips
Single or double clips enable 19mm
FiberTuff posts to hold conductors.
These clips are tough, strong and reliable.
However, they require considerable hand/
finger strength to clip onto posts.
Clip, single, 19mm, each, 0.02 lb. .............#208800 Clip, double, 19mm, each, 0.03 lb. ...........#208810 $0.35
$0.51
premier1supplies.com • 1-800-282-6631